STOC Features
- Stereo computation on the chip reduces PC computation
- Calibrated at the factory, so there is no need to perform a calibration step - it is a "plug and play" device. It can also be upgraded in the field, with different lenses, using the standard SVS calibration procedure.
- Maximum resolution: 640H x 480V pixels
- Color and monochrome versions
- Global shutter - all pixels exposed at the same time
- Simultaneous exposure and readout
- Direct digital information from the imagers, bypasses analog noise and frame grabber jitter
- Conforms to Digital Camera Specification version 1.30.
- Single-cable interface for power, data, and control
- Synced imagers expose corresponding pixels at exactly the same time
- External synchronization - all DCSG devices on the same IEEE 1394 bus are synchronized to capture images at the same time
- Subsampling modes (binning and subwindow) for smaller frame sizes, faster frame rates, lower noise
- Electronic gain and exposure
- All modes fully under user control via the IEEE 1394 bus
- Milled solid aluminum alloy body for extreme rigidity
- Accepts standard C/CS-mount lenses
STOC Kit Contents
- STH-DCSG stereo head, color or monochrome
- 3.0 mm miniature 12 mm diameter lenses standard; other lenses available as options
- Small Vision System stereo analysis software for MS Windows 2000/XP or Linux 2.4/2.6
- 2 meter IEEE 1394 6-pin to 6-pin cable
- Hardware and Software Manuals
STOC Requirements
- Pentium-compatible PC (Pentium PIII/clone or better) running MS Windows 98SE/ME/2000/XP or Linux 2.4/2.6 kernel
- IEEE 1394 PCI or PCMCIA card*
NOTE 1: IEEE 1394 card must supply 1.5W of power through the 6-pin cable. Most PCI cards do this; PCMCIA cards must have a separate transformer power input.
* items are available from Videre Design, see Ordering