DCAM Version History

Version 2.3e
August 2005

Added white balance control for DCSG devices
Updated dcam and dcam640 GUI

Version 2.3d
June 2005

Fixed display of gamma-corrected images to conform to standard FLTK
libraries
Updated Video Params dialog to reflect auto gain/exposure and other
settings
Support for new DCSG device

Version 2.3b
January 2005

Fixed ddisp and ddisp2 applications, needed argument to ->show()
command

Version 2.3a
December 2004

Rationalized the use of framediv, decimation, and binning
parameters.
Support for new MDCS2 device.
Added firmware parameter dialog.

Version 2.1b
March 2004

Saving video. A short sequence of video frames (max 200 frames)
can be captured, saved, and played back.
INF file under MSW 2000. The dcs.inf file is now stored in the
correct location under MSW 2000, so it will be found by the driver
installer.
dcam.exe seg faults if video parameters are changed before pulling
down Video. Fixed.
Display gamma. Added a control for changing the gamma of displayed
images in dcam(640).exe
Exposure control sensitivity. At low exposure levels, the mapping
is one-to-one between the driver values and the dcam register values.
This effectively increases the sensitivity of exposure control at low
levels.